| GARMIN NMEA 2000 ANALOG ADAPTERS Model GET 10 | |||
![[ link compliments of Bethel-Marine.com ]](images/Garmin31.jpg) GET™ 10, Engine Tilt Adapter
With Garmin’s NMEA 2000 Engine
Tilt/Trim Analog Adapter aboard your vessel, you can
give new life to your old gauges by making the
transition from analog to digital. This
simple-to-install adapter takes the data generated by
traditional analog gauges and converts the data into a
NMEA 2000 signal so you can create or expand your
network without replacing all of the equipment on your
boat.
Connect to Your NetworkWith the Garmin GET 10 adapter, you can convert analog information provided via the engine-tilt sensor (not included) on your boat to your NMEA 2000 network. The GET 10 allows you to observe engine-tilt information on compatible Garmin display devices connected to your NMEA 2000 network. Upgrade With EaseGarmin’s line of NMEA 2000 Analog Adapters are easy to add to any existing marine network. Once installed, the data from the adapters can be viewed via the Garmin GMI 10 Digital Marine display and other compatible Garmin devices. This easy-to-use set-up will help you bring your older dashboard into the digital age.
Unit dimensions, WxHxL: 31/32" x 43/64" x 3 3/32" (24.7 x 17.0 x 78.6 mm) Weight: 12.85 oz. (365 g) Total cable length: 16 ft. (4.9 m) Temperature range: From 5°F to 158°F (from -15°C to 70°C) Compass Safe Distance: 2 in. (5 cm) Power Input Source: 9–16 Vdc from the NMEA 2000 bus NMEA 2000 Power Usage: 1 W max NMEA 2000 Load Equivalency Number (LEN): 2 (100 mA)
|
