|
![[ link compliments of Bethel-Marine.com ]](images/Furuno56.jpg)
| 4.5"
Mono LCD |
12
or 24 VDC |
N/A |
If
you are looking for a unit to show you precise depth down to 2 ft and
temperature to 0.02 of a degree, then the RD30 is the answer. Simply
connect the RD30 to our new Furuno Smart Sensor and you are ready to go!
The new Furuno Smart Sensor is an ingeniously engineered depth sensor,
entirely encased within its own transducer housing. The Smart Sensor
connects directly to the RD30 display, via the NMEA data port, without
requiring any additional processor or junction box. Power is supplied to
the Smart Sensor from the connected display. The Smart Sensor operates
at 235kHz. This frequency was chosen for its excellent ability to
provide solid performance at both high speeds and in very shallow
depths. Additionally, the 235kHz frequency will not interfere with other
Furuno echo sounding equipment, including any products running at
200kHz.
These versatile products can also
be added to any NavNet® system, providing numerous NMEA data display
modes, including: Depth, Temperature, Wind Data, Speed, Bearing, Course,
Position, etc.
Standard
Features
-
Versatile,
Multi-Function, NMEA0183 Display and Data Repeater
-
Rugged,
Waterproof Housing with 4.5” Mono LCD
-
Two
independent NMEA0183 Input and Output Ports
-
Programmable
data-combiner, for mixture of NMEA0183 input port data to output
port
-
Up
to 8 NMEA Data parameters can be combined onto either or both
NMEA0183 Output Ports
-
Five
Fully Programmable User Display Modes with Text, Graphic, and
Graphing Capabilities
-
Compatibility
and Capability to Mix NMEA0183 Sources from any NMEA0183 device
-
Simultaneous
Alarm Setting Capabilities for the following parameters:
Temp (.01)/Depth/Speed/Arrival/Anchor/XTE/Trip/Odometer/Timer and
Countdown Timer
-
Multiple
Displays can be “Daisy-Chained” using a maximum of three
displays in a chain
-
Power
to the displays can be controlled from a NavNet display or the first
RD-30 in the chain
-
Programmable
“Offsets” are provided from Depth, Temp, Speed, Time and Wind
Information
-
“Built-In”
LORAN TD converter
-
Resettable
Trip and Odometer Functions
-
Optional
Smart Sensor connects to and is powered by the RD30 display
-
Cable
Extensions will not affect temperature sensing or depth
measurements.
-
Spare
NMEA0183 Input Port allows RD30/Smart Sensor System to be utilized
simultaneously
as a Remote Navigation Data Repeater
-
Optional
Smart Sensor features 235kHz Digital Echo Sounder and Standard/High
Precision Temp Sensor
-
Unique
235kHz provides superior High Speed and Shallow Water performance
-
Smart
Sensor Performance - Approximately 2.5 feet min. - 330 feet max (.8
meters-100 meters)
at speeds up to 50 knots depending on installation and placement
Shipping
Information
Power
Requirements
|
