| Furuno
NavPilot Autopilot Model NAVPILOT 511
Model NAVPILOT 511 |
||||
|
NAVPILOT
511
The NavPilotTM 511
utilizes a self-learning and adaptive software algorithm, providing the
ultimate in course keeping capability. Essential parameters dynamically
adjust for vessel speed, trim, draught, tide and wind effects, dead
band, weather, etc. These parameters are stored in system memory and
continuously optimized.
Simple one-touch mode selection
provides reliable steering and course control. Multiple customizable
display modes include Rudder angle, Heading, Highway, Compass rose,
Wind, Nav Info, etc.
FishHunterTM is a
unique feature that forces a vessel to perform Orbit or Figure Eight
maneuvers around fish targets when a target is received from a
compatible Furuno sounder, sonar, or radar utilizing the TLL feature.
Orbit mode is also invoked when a MOB is received from a Nav Receiver.
Multi-station capability, maximum
of six stations, is available through the utilization of a high speed
network. Standard
Features High
Performance Compact Display Autopilot System for 20+ foot
vessels to Mega-Yachts
Revolutionary
"Adaptive" technology continuously improves performance
for exact and safe navigation
Standard
"Rate Gyro" PG500R compass sensor
(Compass Options include Furuno SC
Series Satellite Compass,
Gyro, etc.)
Four
Operating Modes:
AUTO(Fixed
Heading Control)
ADVANCED
AUTO(Fixed Ground Tracking Eliminating Effects of Wind, Tides,
Swells, or Fishing Operations)
NAV(Navigation
Track Control)
AUTOWORK(Used
For Trolling or Fishing Vessels That May Require Permanent
Trim Compensation) Large
3.6" (viewable area, 160 x 80 pixels) Silver Bright,
Hi-resolution graphics LCD display
Proportional
Rate Rudder Control(w/Reversing Motor Drive Units) or Solenoid
Control
Unique
Fishhunter Modes - Execute ORBIT, SPIRAL, & FIG-8 modes
directly or remotely from a Furuno TLL capable product
Precision
NAV mode XTE Control (.001 NM)
Extensive
"Quick-Change" user customizable navigation data display
modes
Various
Audible and Visual Alarms including user programmable alarm
parameters
"One-Touch"
STBY, AUTO, NAV, and DODGE selections
Tactile
rotary knob course/menu selection
Multiple
Station Capability - Mix & Match up to six Navpilot 500 (FAP5001A)
or 511 (FAP5011A) displays in any combination
May
be configured for various hydraulic or Mechanical Steering Systems Basic
System Specifications and Contents: FAP5001 Waterproof control
unit with 10 meter pigtail interface/power cable, white weather
cover, and standard flush-mount hardware(Control Unit Mounting
Brackets Optional)
FAP5002 Universal
Processor Unit/Junction Box:
Controls Reversible
Drive Units or Solenoid activated steering systems drawing
up to 50 amps (25 amps continuous)
Two software
selectable/nameable NMEA0183 NAV Data input ports and two
fully programmable NMEA0183 output ports; additionally, one
shared RS232 NMEA0183 I/O port is included
Extra Large Wire
Compression Terminals for Power/Motor Connections and "Pluggable"
wire compression connections for Navpilot sensors and I/O
ports FAP6111 Waterproof Inboard
Rudder Reference Unit with transmission linkage and 10 meter
pigtail interface cable. (Cable length may be extended up to 40
Meters with shielded, 22 ga. four wire cable)
Optional Commercial
Grade Rudder Reference Unit FAPRRU-7168 is available
for commercial vessel installations(Standard Credit for
FAP6111 issued upon Navpilot order with FAPRRU-7168) PG500R "Rate
Gyro" compass sensor with LED Status Indicators and 10
Meter pigtail interface/power cable
PG500R includes one
dedicated 6-pin Furuno AD10 protocal 25mS Data Port and one
dedicated 6-pin NMEA0183 (0183HS Selectable) Data Port for
Heading data distribution to radar, sonar, AIS, etc...(Both
Output Ports feature robust RS485 Drivers that may be
paralleled to three devices each)
PG500R includes 10
Meter 6 pin-to-6 pin AD10/NMEA0183 Heading Cable for
interfacing Furuno 17/18/19xx series Radar displays
Full Control of PG500R
is performed through Navpilot Display Notes: Furuno Hydraulic Drive
Units and Voltage/Sizing information are located on the
Accessories page
Navpilot Systems may
be retrofitted to any existing 12V/24V DC Reversing or
Solenoid Drive Unit provided that the current limitations
are observed
Various handheld and
fixed mount remote control units are found on the
Accessories page
Power
Requirements 12
or 24 VDC
7
Watts - 1 control head (excluding pump)
36
Watts - 6 control heads (excluding pump) |
![[ link compliments of Bethel-Marine.com ]](images/Furuno55.jpg)
